County Durham · England
Driveway edging and borders in Newton Aycliffe
If you are planning new driveway edging in Newton Aycliffe, start with a free survey. We measure, check levels and drainage, and set out each part of the price in writing.
- Guide price
- £20–£55 per linear metre
- Postcodes
- DL5, DL4, DL17
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Newton Aycliffe, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. Many homes in Newton Aycliffe have existing tarmac or block drives that can be assessed for an overlay or a rebuild.
Projects we quote in and around Newton Aycliffe include adding a soakaway so water stays on the property, setting a channel drain across a garage entrance and replacing failed edges that have started to crumble. More about driveway edging and borders.
Prices for driveway edging and borders in Newton Aycliffe
Labour and material costs in the North East run below the UK average, and the guide figures below reflect that. They include VAT and are confirmed after a survey.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £20–£55 per linear metre |
| Resin over tarmac and concrete | £40–£60 per m² |
| New resin driveways (full dig-out) | £65–£105 per m² |
Based on North East rates. See the full price guide or price your own project.
Planning in Newton Aycliffe
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
The North East has cool winters, so resin is laid in the warmer months or on dry, mild days when ground and air are above about 5°C. We only lay resin on dry days with ground and air above about 5°C, so Newton Aycliffe jobs are booked with the forecast in mind.
How it works
Guide price first, then a free visit, then a line-by-line quote. Nothing is booked until you have the specification in writing.
Driveway edging and borders in Newton Aycliffe: questions
Who approves dropped kerbs in Newton Aycliffe?
Dropped kerb consent comes from your council as local highway authority. We help with the application and get your drive ready to meet the new crossing.
Is the price fixed for Newton Aycliffe jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
Do I need planning permission in Newton Aycliffe?
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Driveway edging and borders near Newton Aycliffe
- Bishop Auckland 4.9 mi
- Darlington 6.6 mi
- Stockton-on-Tees 10.7 mi
- Durham 10.9 mi
- Billingham 11.5 mi
Other services in Newton Aycliffe
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Newton Aycliffe
We cover DL5, DL4 and DL17 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or