Derbyshire · England
Driveway edging and borders in Alfreton
Thinking about new driveway edging in Alfreton? Get a guide price in under a minute, then a free survey and a fixed written quote once the specification is agreed.
- Guide price
- £25–£60 per linear metre
- Postcodes
- DE55
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Alfreton, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. Plots around Alfreton are often generous, so turning areas and longer runs of edging are part of many quotes.
Across Derbyshire, the projects we price include replacing failed edges that have started to crumble, preparing a drive to meet a new dropped kerb and digging out an old drive and building a permeable sub-base. More about driveway edging and borders.
Prices for driveway edging and borders in Alfreton
Guide prices for Alfreton are based on East Midlands rates, which are close to the UK average. The written quote after your survey is the figure that counts.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £25–£60 per linear metre |
| Driveway extensions and widening | £75–£120 per m² |
| New resin driveways (full dig-out) | £75–£120 per m² |
Based on East Midlands rates. See the full price guide or price your own project.
Planning in Alfreton
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
The East Midlands sits around the UK average for rainfall, with a mix of clay vales and lighter ground that changes what the base needs. Spring to autumn offers the most laying days in Derbyshire, but dry, mild winter days can work too.
How it works
Guide price first, then a free visit, then a line-by-line quote. Nothing is booked until you have the specification in writing.
Driveway edging and borders in Alfreton: questions
What postcodes do you cover around Alfreton?
We cover DE55 and the surrounding districts, including Ripley and Heanor.
How much is new driveway edging in Alfreton?
As a guide, £25–£60 per linear metre in Alfreton including VAT, depending on length, ground conditions and access. Your written quote follows a free survey.
Who approves dropped kerbs in Alfreton?
Dropped kerb consent comes from your council as local highway authority. We help with the application and get your drive ready to meet the new crossing.
Driveway edging and borders near Alfreton
- Ripley 4.5 mi
- Heanor 5.9 mi
- Belper 6.5 mi
- Ilkeston 9.3 mi
- Chesterfield 10.6 mi
Other services in Alfreton
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Alfreton
We cover DE55 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or