Resin Driveway Contractors

Essex · England

Driveway edging and borders in Chelmsford

Thinking about new driveway edging in Chelmsford? Get a guide price in under a minute, then a free survey and a fixed written quote once the specification is agreed.

Guide price
£25–£65 per linear metre
Postcodes
CM1
Survey
Free, no obligation
Computer-generated exampleDriveway edging and borders: computer-generated example

What driveway edging and borders involve

Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.

In Chelmsford, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. Chelmsford has a broad mix of housing, from terraces near the centre to detached homes on the edges.

Projects we quote in and around Chelmsford include digging out an old drive and building a permeable sub-base, fitting setts or steel edging around a new drive and replacing failed edges that have started to crumble. More about driveway edging and borders.

Prices for driveway edging and borders in Chelmsford

Labour and material costs in the East of England run above the UK average, and the guide figures below reflect that. They include VAT and are confirmed after a survey.

Guide prices in Chelmsford
ServiceGuide price inc VAT
Driveway edging and borders£25–£65 per linear metre
Driveway extensions and widening£80–£130 per m²
Resin bonded driveways£40–£110 per m²

Based on East of England rates. See the full price guide or price your own project.

Planning in Chelmsford

In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.

Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.

General information for England, not legal advice.

Weather and working days

The East of England is the driest part of the UK, which gives a long resin laying season, though heavy clays in places mean the sub-base needs designing for slow drainage. Laying days in Chelmsford are confirmed close to the date, because rain and cold stop resin curing properly.

How it works

You start with a guide price, we visit to measure and check the site, you get a written quote, and we book the work for suitable weather.

Driveway edging and borders in Chelmsford: questions

Is the price fixed for Chelmsford jobs?

Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.

How much is new driveway edging in Chelmsford?

As a guide, £25–£65 per linear metre in Chelmsford including VAT, depending on length, ground conditions and access. Your written quote follows a free survey.

Do I need planning permission in Chelmsford?

In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.

Free survey · itemised quote

Book a free survey in Chelmsford

We cover CM1 and nearby. Tell us about your project and we will be in touch to arrange a visit.

  • Base, edging and drainage priced line by line
  • Real blend samples shown in daylight
  • Price fixed in writing once the spec is agreed

Prefer to talk? 0800 088 6341 or

Get your free survey and written quote

No obligation. We use your details only to arrange your survey and quote.

Call Guide price