Greater Manchester · England
Driveway edging and borders in Golborne
Planning new driveway edging in Golborne? We survey and price the work across WN4, WN7 and WN3, with a free site visit and an itemised written quote.
- Guide price
- £25–£55 per linear metre
- Postcodes
- WN4, WN7, WN3
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Golborne, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. Plots around Golborne are often generous, so turning areas and longer runs of edging are part of many quotes.
In Golborne we can price work such as replacing failed edges that have started to crumble, adding a soakaway so water stays on the property and preparing a drive to meet a new dropped kerb. More about driveway edging and borders.
Prices for driveway edging and borders in Golborne
For the North West, where typical costs are a little below the UK average, these are the ranges we would expect before seeing your property.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £25–£55 per linear metre |
| Resin garden paths | £45–£130 per m² |
| Driveway drainage and soakaways | £45–£100 per linear metre |
Based on North West rates. See the full price guide or price your own project.
Planning in Golborne
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
The North West is one of the wetter parts of England, so laying days are picked carefully and drainage under the drive gets extra attention. Laying days in Golborne are confirmed close to the date, because rain and cold stop resin curing properly.
How it works
Guide price first, then a free visit, then a line-by-line quote. Nothing is booked until you have the specification in writing.
Driveway edging and borders in Golborne: questions
Who approves dropped kerbs in Golborne?
Dropped kerb consent comes from your council as local highway authority. We help with the application and get your drive ready to meet the new crossing.
How much is new driveway edging in Golborne?
As a guide, £25–£55 per linear metre in Golborne including VAT, depending on length, ground conditions and access. Your written quote follows a free survey.
Is the price fixed for Golborne jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
Driveway edging and borders near Golborne
- Ashton-in-Makerfield 2.2 mi
- Leigh 3.4 mi
- Hindley 3.9 mi
- Wigan 4.9 mi
- Atherton 5.3 mi
Other services in Golborne
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Golborne
We cover WN4, WN7 and WN3 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or