Gwynedd · Wales
Driveway edging and borders in Holyhead
We quote driveway edging and borders for homes across Holyhead, from the LL65 district outwards, and send an itemised written price after a free visit.
- Guide price
- £25–£55 per linear metre
- Postcodes
- LL65
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
Before quoting groundworks in Holyhead we check levels against door thresholds, look for shallow services and plan where spoil and materials will go. Plots around Holyhead are often generous, so turning areas and longer runs of edging are part of many quotes.
Typical projects we can quote for in Holyhead include setting a channel drain across a garage entrance, preparing a drive to meet a new dropped kerb and adding a soakaway so water stays on the property. More about driveway edging and borders.
Prices for driveway edging and borders in Holyhead
Labour and material costs in North Wales run below the UK average, and the guide figures below reflect that. They include VAT and are confirmed after a survey.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £25–£55 per linear metre |
| Resin patios | £40–£110 per m² |
| Resin over tarmac and concrete | £40–£65 per m² |
Based on North Wales rates. See the full price guide or price your own project.
Planning in Holyhead
Wales has its own permitted development rules on the same principle: a front-garden hard surface should be porous or drain to a permeable area on the property. A fully permeable resin bound build, with a porous base under it, meets that test.
In Wales, new construction with drainage implications covering 100 m² or more can also need approval from the council's SuDS Approving Body (SAB). Most domestic drives are smaller than that, but larger drives and extensions are checked at survey.
General information for Wales, not legal advice.
Weather and working days
North Wales ranges from mild coastal towns to wetter upland areas, so drainage and laying days are planned with the weather in mind. We only lay resin on dry days with ground and air above about 5°C, so Holyhead jobs are booked with the forecast in mind.
How it works
Guide price first, then a free visit, then a line-by-line quote. Nothing is booked until you have the specification in writing.
Driveway edging and borders in Holyhead: questions
Do I need planning permission in Holyhead?
Wales has its own permitted development rules on the same principle: a front-garden hard surface should be porous or drain to a permeable area on the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Is the price fixed for Holyhead jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
How much is new driveway edging in Holyhead?
As a guide, £25–£55 per linear metre in Holyhead including VAT, depending on length, ground conditions and access. Your written quote follows a free survey.
Driveway edging and borders near Holyhead
- Caernarfon 18.8 mi
- Bangor 21.5 mi
Other services in Holyhead
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Holyhead
We cover LL65 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or