Isle of Wight · England
Driveway edging and borders in Ryde
Thinking about new driveway edging in Ryde? Get a guide price in under a minute, then a free survey and a fixed written quote once the specification is agreed.
- Guide price
- £30–£65 per linear metre
- Postcodes
- PO33, PO34, PO35
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Ryde, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. Plots around Ryde are often generous, so turning areas and longer runs of edging are part of many quotes.
In Ryde we can price work such as adding a soakaway so water stays on the property, fitting setts or steel edging around a new drive and setting a channel drain across a garage entrance. More about driveway edging and borders.
Prices for driveway edging and borders in Ryde
Labour and material costs in the South East run above the UK average, and the guide figures below reflect that. They include VAT and are confirmed after a survey.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £30–£65 per linear metre |
| Dropped kerb applications | about £1,000–£2,500 per crossing, set by the highway authority |
| Resin driveway cleaning | £90–£225 per visit |
Based on South East rates. See the full price guide or price your own project.
Planning in Ryde
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
The South East is relatively dry, with long laying seasons, but clay soils are common across much of the region and can drain slowly. If the weather turns on the day, we move the pour rather than risk a surface that will not cure.
How it works
Get a guide price online, book a free survey, receive an itemised written quote, then agree a date. Most drives over a ready base are laid in a day.
Driveway edging and borders in Ryde: questions
What postcodes do you cover around Ryde?
We cover PO33, PO34 and PO35 and the surrounding districts, including Sandown and Newport.
Is the price fixed for Ryde jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
Do I need planning permission in Ryde?
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Driveway edging and borders near Ryde
Other services in Ryde
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Ryde
We cover PO33, PO34 and PO35 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or