Kent · England
Driveway edging and borders in Ramsgate
Thinking about new driveway edging in Ramsgate? Get a guide price in under a minute, then a free survey and a fixed written quote once the specification is agreed.
- Guide price
- £30–£65 per linear metre
- Postcodes
- CT11, CT10, CT12
- Survey
- Free, no obligation

What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Ramsgate, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. Many homes in Ramsgate have existing tarmac or block drives that can be assessed for an overlay or a rebuild.
Projects we quote in and around Ramsgate include setting a channel drain across a garage entrance, fitting setts or steel edging around a new drive and adding a soakaway so water stays on the property. More about driveway edging and borders.
Prices for driveway edging and borders in Ramsgate
Labour and material costs in the South East run above the UK average, and the guide figures below reflect that. They include VAT and are confirmed after a survey.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £30–£65 per linear metre |
| Resin bonded driveways | £40–£110 per m² |
| Dropped kerb applications | about £1,000–£2,500 per crossing, set by the highway authority |
Based on South East rates. See the full price guide or price your own project.
Planning in Ramsgate
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
The South East is relatively dry, with long laying seasons, but clay soils are common across much of the region and can drain slowly. We only lay resin on dry days with ground and air above about 5°C, so Ramsgate jobs are booked with the forecast in mind.
How it works
You start with a guide price, we visit to measure and check the site, you get a written quote, and we book the work for suitable weather.
Driveway edging and borders in Ramsgate: questions
Is the price fixed for Ramsgate jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
How much is new driveway edging in Ramsgate?
As a guide, £30–£65 per linear metre in Ramsgate including VAT, depending on length, ground conditions and access. Your written quote follows a free survey.
How soon can you survey in Ramsgate?
Call 0800 088 6341 or use the quote tool and we will offer survey dates. Surveys are free and run all year.
Driveway edging and borders near Ramsgate
- Broadstairs 1.9 mi
- Margate 3.4 mi
- Deal 7.8 mi
- Herne Bay 12.8 mi
- Canterbury 15.1 mi
Other services in Ramsgate
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Ramsgate
We cover CT11, CT10 and CT12 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or