Lanarkshire · Scotland
Driveway edging and borders in Bellshill
From Bellshill to Viewpark, we price driveway edging and borders with each part of the work set out separately, so you can see where the money goes.
- Guide price
- £20–£55 per linear metre
- Postcodes
- ML4, ML1, G71
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Bellshill, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. In and around Bellshill, drives often run further from the road, so edging, falls and drainage are planned along the whole length.
Typical projects we can quote for in Bellshill include replacing failed edges that have started to crumble, setting a channel drain across a garage entrance and adding a soakaway so water stays on the property. More about driveway edging and borders.
Prices for driveway edging and borders in Bellshill
For Central Scotland, where typical costs are below the UK average, these are the ranges we would expect before seeing your property.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £20–£55 per linear metre |
| Driveway drainage and soakaways | £45–£100 per linear metre |
| Resin patios | £40–£105 per m² |
Based on Central Scotland rates. See the full price guide or price your own project.
Planning in Bellshill
Scotland's householder permitted development rules allow many hard surfaces at a house where the surface is porous or water drains to a permeable area within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Flats, listed buildings and conservation areas are treated differently, so if any of those apply we suggest a quick check with your council's planning team before work starts.
General information for Scotland, not legal advice.
Weather and working days
Central Scotland gets steady rainfall through the year, so a permeable build and well-planned falls keep drives free of standing water. If the weather turns on the day, we move the pour rather than risk a surface that will not cure.
How it works
Guide price first, then a free visit, then a line-by-line quote. Nothing is booked until you have the specification in writing.
Driveway edging and borders in Bellshill: questions
Is the price fixed for Bellshill jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
What postcodes do you cover around Bellshill?
We cover ML4, ML1 and G71 and the surrounding districts, including Viewpark and Motherwell.
How much is new driveway edging in Bellshill?
As a guide, £20–£55 per linear metre in Bellshill including VAT, depending on length, ground conditions and access. Your written quote follows a free survey.
Driveway edging and borders near Bellshill
- Viewpark 1.7 mi
- Motherwell 2.1 mi
- Coatbridge 3.2 mi
- Blantyre 3.3 mi
- Hamilton 3.5 mi
Other services in Bellshill
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Bellshill
We cover ML4, ML1 and G71 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or