Warwickshire · England
Driveway edging and borders in Rugby
If you are planning new driveway edging in Rugby, start with a free survey. We measure, check levels and drainage, and set out each part of the price in writing.
- Guide price
- £25–£60 per linear metre
- Postcodes
- CV21, CV22
- Survey
- Free, no obligation

What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Rugby, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. Plot sizes and existing surfaces vary a lot across Rugby, so the survey comes before any fixed figure.
Projects we quote in and around Rugby include fitting setts or steel edging around a new drive, replacing failed edges that have started to crumble and setting a channel drain across a garage entrance. More about driveway edging and borders.
Prices for driveway edging and borders in Rugby
For the West Midlands, where typical costs are close to the UK average, these are the ranges we would expect before seeing your property.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £25–£60 per linear metre |
| Resin bound driveways | £45–£120 per m² |
| Resin driveway cleaning | £80–£200 per visit |
Based on West Midlands rates. See the full price guide or price your own project.
Planning in Rugby
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
The West Midlands is close to the UK average for rainfall, and much of the region sits on clay that holds water after wet spells. We only lay resin on dry days with ground and air above about 5°C, so Rugby jobs are booked with the forecast in mind.
How it works
Get a guide price online, book a free survey, receive an itemised written quote, then agree a date. Most drives over a ready base are laid in a day.
Driveway edging and borders in Rugby: questions
How soon can you survey in Rugby?
Call 0800 088 6341 or use the quote tool and we will offer survey dates. Surveys are free and run all year.
Who approves dropped kerbs in Rugby?
Dropped kerb consent comes from your council as local highway authority. We help with the application and get your drive ready to meet the new crossing.
Is the price fixed for Rugby jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
Driveway edging and borders near Rugby
- Bedworth 11.4 mi
- Leamington Spa 12.3 mi
- Nuneaton 13.5 mi
- Kenilworth 13.5 mi
- Warwick 14.8 mi
Other services in Rugby
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Rugby
We cover CV21 and CV22 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or