West Yorkshire · England
Driveway edging and borders in Cleckheaton
Thinking about new driveway edging in Cleckheaton? Get a guide price in under a minute, then a free survey and a fixed written quote once the specification is agreed.
- Guide price
- £25–£55 per linear metre
- Postcodes
- BD19, WF15, WF16
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
Before quoting groundworks in Cleckheaton we check levels against door thresholds, look for shallow services and plan where spoil and materials will go. Homes in Cleckheaton range from period properties to modern estates, each with its own drainage and access questions.
In Cleckheaton we can price work such as setting a channel drain across a garage entrance, preparing a drive to meet a new dropped kerb and digging out an old drive and building a permeable sub-base. More about driveway edging and borders.
Prices for driveway edging and borders in Cleckheaton
For Yorkshire and the Humber, where typical costs are a little below the UK average, these are the ranges we would expect before seeing your property.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £25–£55 per linear metre |
| Resin over tarmac and concrete | £40–£65 per m² |
| Resin bonded driveways | £35–£95 per m² |
Based on Yorkshire and the Humber rates. See the full price guide or price your own project.
Planning in Cleckheaton
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
Rainfall varies widely across Yorkshire, from the drier Vale of York to wetter Pennine towns, and cold snaps shorten the laying season at either end. Surveys run all year; resin work itself waits for a dry day above about 5°C.
How it works
The steps are simple: guide price, free survey, written quote with a fixed price once the specification is agreed, then a date that suits you and the weather.
Driveway edging and borders in Cleckheaton: questions
Is the price fixed for Cleckheaton jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
Do I need planning permission in Cleckheaton?
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
How much is new driveway edging in Cleckheaton?
As a guide, £25–£55 per linear metre in Cleckheaton including VAT, depending on length, ground conditions and access. Your written quote follows a free survey.
Driveway edging and borders near Cleckheaton
- Liversedge 1.5 mi
- Heckmondwike 1.9 mi
- Brighouse 3.3 mi
- Batley 3.6 mi
- Mirfield 3.6 mi
Other services in Cleckheaton
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Cleckheaton
We cover BD19, WF15 and WF16 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or