North East Scotland · Scotland

Resin bound driveways in Aberdeenshire

Resin bound driveways throughout Aberdeenshire: free site visits, guide prices adjusted for North East Scotland rates and a written quote with every part of the job set out line by line.

Guide price: £40–£105 per m²
Postcode areas: AB, DD
Survey: Free, no obligation

Get my guide price 0800 088 6341

Computer-generated example Resin bound driveways: computer-generated example

Resin bound driveways across Aberdeenshire

A resin bound driveway is a surface of natural stone aggregate mixed with clear polyurethane resin and trowelled by hand to a depth of around 18 mm on driveways. Every stone is fully coated, so the finish is smooth, has no loose gravel, and lets rainwater drain straight through it.

It is not a cure for a bad base. Resin bound copies whatever is underneath it, so cracks, soft spots and failed edges in the old surface come straight back through. Most of the survey is spent deciding whether the existing tarmac or concrete is good enough to overlay, or whether it needs digging out.

Across Aberdeenshire, the projects we price include swapping loose gravel for a resin surface that stays put, overlaying sound tarmac on a two-car drive and adding a channel drain where a drive falls towards the garage.

Prices in Aberdeenshire

Guide prices for Aberdeenshire are based on North East Scotland rates, which are below the UK average. The written quote after your survey is the figure that counts.

Resin bound driveways: £40–£105 per m².

Worked example: a 56 m² drive in Aberdeenshire laid as an overlay on sound tarmac or concrete would typically come to about £2,250–£3,500. The same area with a dig-out and new permeable base would be nearer £3,750–£6,000.

Planning in Aberdeenshire

Scotland's householder permitted development rules allow many hard surfaces at a house where the surface is porous or water drains to a permeable area within the property. A fully permeable resin bound build, with a porous base under it, meets that test.

Flats, listed buildings and conservation areas are treated differently, so if any of those apply we suggest a quick check with your council's planning team before work starts.

Weather and working days

North East Scotland is relatively dry for Scotland but cold, so the laying season is shorter and a free-draining base helps with frost. Surveys run all year; resin work itself waits for a dry day above about 5°C.

Towns in Aberdeenshire