Dumfries and Galloway · Scotland

Resin bound driveways in Annan

We quote resin bound driveways for homes across Annan, from the DG12 district outwards, and send an itemised written price after a free visit.

Guide price: £40–£105 per m²
Postcodes: DG12
Survey: Free, no obligation

Start my Annan quote 0800 088 6341

Computer-generated example Resin bound driveways: computer-generated example

What resin bound driveways involve

A resin bound driveway is a surface of natural stone aggregate mixed with clear polyurethane resin and trowelled by hand to a depth of around 18 mm on driveways. Every stone is fully coated, so the finish is smooth, has no loose gravel, and lets rainwater drain straight through it.

Any quote we prepare in Annan says which base route we recommend and why, with the depth, the resin and the aggregate written down. Plots around Annan are often generous, so turning areas and longer runs of edging are part of many quotes.

Projects we quote in and around Annan include swapping loose gravel for a resin surface that stays put, building a fully permeable drive on a front garden and turning a cracked concrete drive into a seamless resin bound surface. More about resin bound driveways.

Prices for resin bound driveways in Annan

Guide prices for Annan are based on South of Scotland rates, which are below the UK average. The written quote after your survey is the figure that counts.

Typical Annan figures for a 65 m² drive: £2,600–£4,050 over sound tarmac or concrete; £4,350–£6,950 with a dig-out and new permeable base. Both include VAT.

Guide prices in Annan
Service	Guide price inc VAT
Resin bound driveways	£40–£105 per m²
Resin over tarmac and concrete	£40–£60 per m²
Resin garden paths	£45–£125 per m²

Based on South of Scotland rates. See the full price guide or price your own project.

Planning in Annan

Scotland's householder permitted development rules allow many hard surfaces at a house where the surface is porous or water drains to a permeable area within the property. A fully permeable resin bound build, with a porous base under it, meets that test.

Flats, listed buildings and conservation areas are treated differently, so if any of those apply we suggest a quick check with your council's planning team before work starts.

General information for Scotland, not legal advice.

Weather and working days

The South of Scotland mixes wet western hills with drier eastern lowlands, and frost is common in winter. We only lay resin on dry days with ground and air above about 5°C, so Annan jobs are booked with the forecast in mind.

How it works

You start with a guide price, we visit to measure and check the site, you get a written quote, and we book the work for suitable weather.