County Durham · England
Driveway edging and borders in Yarm
Planning new driveway edging in Yarm? We survey and price the work across TS15, TS16 and TS17, with a free site visit and an itemised written quote.
- Guide price
- £20–£55 per linear metre
- Postcodes
- TS15, TS16, TS17
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Yarm, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. In and around Yarm, drives often run further from the road, so edging, falls and drainage are planned along the whole length.
Across County Durham, the projects we price include digging out an old drive and building a permeable sub-base, replacing failed edges that have started to crumble and adding a soakaway so water stays on the property. More about driveway edging and borders.
Prices for driveway edging and borders in Yarm
Labour and material costs in the North East run below the UK average, and the guide figures below reflect that. They include VAT and are confirmed after a survey.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £20–£55 per linear metre |
| New resin driveways (full dig-out) | £65–£105 per m² |
| Resin garden paths | £45–£125 per m² |
Based on North East rates. See the full price guide or price your own project.
Planning in Yarm
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
The North East has cool winters, so resin is laid in the warmer months or on dry, mild days when ground and air are above about 5°C. We only lay resin on dry days with ground and air above about 5°C, so Yarm jobs are booked with the forecast in mind.
How it works
Guide price first, then a free visit, then a line-by-line quote. Nothing is booked until you have the specification in writing.
Driveway edging and borders in Yarm: questions
Is the price fixed for Yarm jobs?
Yes, once the scope and specification are agreed in writing. If hidden ground conditions turn up, we explain and agree any change with you before doing extra work.
How soon can you survey in Yarm?
Call 0800 088 6341 or use the quote tool and we will offer survey dates. Surveys are free and run all year.
What postcodes do you cover around Yarm?
We cover TS15, TS16 and TS17 and the surrounding districts, including Stockton-on-Tees and Billingham.
Driveway edging and borders near Yarm
- Stockton-on-Tees 4.7 mi
- Billingham 6.5 mi
- Darlington 7.9 mi
- Newton Aycliffe 11.7 mi
- Hartlepool 13.9 mi
Other services in Yarm
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Yarm
We cover TS15, TS16 and TS17 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or