Kent · England
Driveway edging and borders in Folkestone
Thinking about new driveway edging in Folkestone? Get a guide price in under a minute, then a free survey and a fixed written quote once the specification is agreed.
- Guide price
- £30–£65 per linear metre
- Postcodes
- CT19, CT20
- Survey
- Free, no obligation
What driveway edging and borders involve
Driveway edging is the restraint fixed around a resin surface, such as granite setts, block, steel or timber, that holds the edge in place, gives a clean line against lawns and borders, and frames the colour of the resin.
In Folkestone, the survey for this work is about levels, falls and ground conditions: where water goes now, what is under the surface and how materials will reach the site. Folkestone mixes older streets with newer estates, and many homes have room for two or more cars.
Across Kent, the projects we price include replacing failed edges that have started to crumble, adding a soakaway so water stays on the property and digging out an old drive and building a permeable sub-base. More about driveway edging and borders.
Prices for driveway edging and borders in Folkestone
Labour and material costs in the South East run above the UK average, and the guide figures below reflect that. They include VAT and are confirmed after a survey.
| Service | Guide price inc VAT |
|---|---|
| Driveway edging and borders | £30–£65 per linear metre |
| Driveway drainage and soakaways | £55–£125 per linear metre |
| Resin patios | £50–£135 per m² |
Based on South East rates. See the full price guide or price your own project.
Planning in Folkestone
In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.
Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.
General information for England, not legal advice.
Weather and working days
The South East is relatively dry, with long laying seasons, but clay soils are common across much of the region and can drain slowly. Surveys run all year; resin work itself waits for a dry day above about 5°C.
How it works
Get a guide price online, book a free survey, receive an itemised written quote, then agree a date. Most drives over a ready base are laid in a day.
Driveway edging and borders in Folkestone: questions
What postcodes do you cover around Folkestone?
We cover CT19 and CT20 and the surrounding districts, including Dover and Ashford.
Who approves dropped kerbs in Folkestone?
Dropped kerb consent comes from your council as local highway authority. We help with the application and get your drive ready to meet the new crossing.
How soon can you survey in Folkestone?
Call 0800 088 6341 or use the quote tool and we will offer survey dates. Surveys are free and run all year.
Driveway edging and borders near Folkestone
- Dover 7.0 mi
- Ashford 13.5 mi
- Deal 14.1 mi
- Canterbury 14.2 mi
- Faversham 20.1 mi
Other services in Folkestone
- Resin bound driveways
- Resin bonded driveways
- Resin over tarmac and concrete
- New resin driveways (full dig-out)
- Permeable SuDS driveways
- Driveway extensions and widening
- Resin patios
- Resin garden paths
- Resin steps
- Accessible resin ramps
- Excavation and sub-base
- Driveway drainage and soakaways
- Dropped kerb applications
- Resin driveway repairs
- Resin driveway cleaning
- Resin driveway restoration
- Commercial resin surfacing
Free survey · itemised quote
Book a free survey in Folkestone
We cover CT19 and CT20 and nearby. Tell us about your project and we will be in touch to arrange a visit.
- Base, edging and drainage priced line by line
- Real blend samples shown in daylight
- Price fixed in writing once the spec is agreed
Prefer to talk? 0800 088 6341 or