Resin Driveway Contractors

Kent · England

Resin bound driveways in Folkestone

Resin bound driveways in Folkestone, Kent: free survey, honest guide prices and a written quote that sets out each part of the job before anything is booked.

Guide price
£50–£135 per m²
Postcodes
CT19, CT20
Survey
Free, no obligation
Computer-generated exampleResin bound driveways: computer-generated example

What resin bound driveways involve

A resin bound driveway is a surface of natural stone aggregate mixed with clear polyurethane resin and trowelled by hand to a depth of around 18 mm on driveways. Every stone is fully coated, so the finish is smooth, has no loose gravel, and lets rainwater drain straight through it.

Any resin job in Folkestone starts the same way: we check whether your existing surface is sound enough to overlay or needs digging out, because that decides both the price and how long the surface lasts. Folkestone mixes older streets with newer estates, and many homes have room for two or more cars.

Typical projects we can quote for in Folkestone include overlaying sound tarmac on a two-car drive, building a fully permeable drive on a front garden and swapping loose gravel for a resin surface that stays put. More about resin bound driveways.

Prices for resin bound driveways in Folkestone

Guide prices for Folkestone are based on South East rates, which are above the UK average. The written quote after your survey is the figure that counts.

Typical Folkestone figures for a 44 m² drive: £2,200–£3,450 over sound tarmac or concrete; £3,700–£5,900 with a dig-out and new permeable base. Both include VAT.

Guide prices in Folkestone
ServiceGuide price inc VAT
Resin bound driveways£50–£135 per m²
Driveway edging and borders£30–£65 per linear metre
Dropped kerb applicationsabout £1,000–£2,500 per crossing, set by the highway authority

Based on South East rates. See the full price guide or price your own project.

Planning in Folkestone

In England, a new or replaced hard surface of more than 5 m² in a front garden is permitted development only if it is porous, or if rainwater drains to a lawn, border or soakaway within the property. A fully permeable resin bound build, with a porous base under it, meets that test.

Permitted development rights apply to houses, not flats or maisonettes, and some conservation areas have Article 4 directions that remove them. Listed buildings can need consent if railings or historic walls are affected.

General information for England, not legal advice.

Weather and working days

The South East is relatively dry, with long laying seasons, but clay soils are common across much of the region and can drain slowly. Laying days in Folkestone are confirmed close to the date, because rain and cold stop resin curing properly.

How it works

Guide price first, then a free visit, then a line-by-line quote. Nothing is booked until you have the specification in writing.

Resin bound driveways in Folkestone: questions

How soon can you survey in Folkestone?

Call 0800 088 6341 or use the quote tool and we will offer survey dates. Surveys are free and run all year.

Can you match a resin colour I have seen in Folkestone?

Often, yes. Tell us where you saw it or show us a photo, and we will bring the closest blends to the survey to compare in daylight.

How much is a resin bound driveway in Folkestone?

As a guide, £50–£135 per m² in Folkestone including VAT, depending mainly on whether your existing base can be overlaid. Your written quote follows a free survey.

Free survey · itemised quote

Book a free survey in Folkestone

We cover CT19 and CT20 and nearby. Tell us about your project and we will be in touch to arrange a visit.

  • Base, edging and drainage priced line by line
  • Real blend samples shown in daylight
  • Price fixed in writing once the spec is agreed

Prefer to talk? 0800 088 6341 or

Get your free survey and written quote

No obligation. We use your details only to arrange your survey and quote.

Call Guide price